- EN
- TR
LABORATORY APPLICATIONS
DENSITY DEVICE
To determine the density value of
plastic materials and parts with the
Immersion Method.
LIQUIDITY DETERMINATION DEVICE
The melt flow determination test
is used to analyze the characteristics of
granular plastic raw materials.
MOISTURE DETERMINATION DEVICE
The amount of moisture
is based on the principle of evaporating the water
in the sample under a certain temperature...
SHORE D HARDNESS DEVICE
Hardness is generally defined as the
resistance of the material to deformation.
DRYING OVEN
Raw material is used for
finished product moisture tests, thermal oxidation resistance test and
raw material drying.
COLOR MEASURING DEVICE
Color; is a perception that varies from
person to person, depending on the person's eye sensitivity, age, gender and
even psychological state...
LIGHT CABINET
Accurate color is important in production and
quality control in all industries.
More>>>
ADDITIVE TEST DEVICE
The amount of plastic in the sample,
which is kept by burning in the oven at a certain temperature
for a certain period of time...
TEMPERATURE AND HUMIDITY MEASURING DEVICE
It is for the measurement of
ambient temperature and humidity.
More>>>
ODOR TEST
It is the determination of the degree of
odor differences of materials in different conditioning.
DENSITY DEVICE
To determine the density value of plastic materials and parts with the Immersion Method.
Measurement Range: MAX. 220 gr.
LIQUIDITY DETERMINATION DEVICE
The melt flow determination test is used to analyze the characteristics of granular plastic raw materials. It provides the calculation of the amount of flow that the material reveals by melting in a certain time period under a certain temperature and load. Thus, the behavior of the raw material during the process can be simulated and its compliance or non-compliance can be determined.
Measurement Range: 0-400°C
MOISTURE DETERMINATION DEVICE
The amount of moisture is based on the principle of evaporating the water in the sample under a certain temperature and finding the amount of moisture from the weight loss. It is the dry matter that remains after the moisture in the sample has been evaporated. There is a relation between moisture and dry matter % humidity= 100 - % dry matter.
Measurement Range: 50 - 160°
SHORE D HARDNESS DEVICE
Hardness is generally defined as the resistance of the material to deformation. Hardness is not a direct measure, but is calculated over the deformation of a material with higher strength on another material with lower strength.
Measurement Range: 0-100 Sh-D
DRYING OVEN
Raw material is used for finished product moisture tests, thermal oxidation resistance test and raw material drying.
Measurement Range: +5°C ile 250°C
COLOR MEASURING DEVICE
Colour; is a perception that varies from person to person, depending on the person's eye sensitivity, age, gender and even psychological state, the lighting of the environment and the light source, the angle at which the light falls on the sample, the size differences of the objects to be compared and the contrast of the background.
In color controls for commercial purposes, color measuring devices eliminate all these factors, express the color numerically, create a reference for color comparisons, and eliminate all other uncertainties for R&D, production and quality control departments thanks to measurements based on this reference.
Measurement Range: 400~700nm
LIGHT CABINET
Accurate color is important in production and quality control in all industries. When color does not meet specifications, the result is more rejects and rework, increasing cost and time to market. Therefore, the importance of seeing color in controlled lighting conditions is important.
Measurement Range: Measurement Range: Visual evaluation is made according to the Master Sample.
ADDITIVE TEST DEVICE
The amount of plastic in the sample, which is kept by burning in the oven at a certain temperature for a certain period of time, is removed from the environment and brought to a constant weight. The amount of ash is calculated as %, and the amount and type of additive in the material is determined.
In the muffle furnace, the filling/reinforcement ratio of the product can also be determined by the ISO 3451 standard. The filling/reinforcement ratio of the material affects all its properties, especially the mechanical properties.
Measurement Range: 23 - 1100°C
TEMPERATURE AND HUMIDITY MEASURING DEVICE
It is for the measurement of ambient temperature and humidity.
Measurement Range: °C / % RH Nem
ODOR TEST
It is the determination of the degree of odor differences of materials in different conditioning.
Evaluation is made with 5 odor evaluators.
It is carried out according to the conditions specified in the relevant specifications.
FLTM BO 131-03 (20±2°C,40±2°C, 80±2°C)"
Measurement Range: -